• [2018-10-19]

    Which analyzer can not be used to analyze?

    The process of spectral analysis is the introduction of the sample into the light source, the energy of the sample, the sample evaporation into gaseous atoms, and the outer layer of the gaseous atoms excited by the low energy state, in which the atoms are very unstable to the ground state or low energy state, then produced radiation.

  • [2018-10-19]

    Method and equipment for rapid inspection of steel components

    Main technical index of carbon and sulfur: Measurement range: carbon: 12.8% ~ 0.02% (need to change the amount of sample): 0.001% ~ 3% Measurement time: carbon sulfur about 45 seconds (excluding the sample, sampling time) Element analysis method: photoelectric colorimetric analysis

  • [2018-10-19]

    Several methods for analysis of carbon and sulfur in iron and steel

    1, (high frequency infrared carbon sulfur analyzer) infrared absorption method: the carbon and sulfur in the sample is heated by high temperature under oxygen enrichment, which is oxidized to carbon dioxide and sulfur dioxide gas. After treatment, the gas enters the corresponding absorption cell, and absorbs the corresponding infrared radiation. The detector is transmitted to the signal, and the output results are processed by the computer.

  • [2018-10-19]

    Jabo teaches you how to choose a satisfactory laser particle analyzer

    Jabo teaches you how to choose a satisfactory laser particle analyzer Jabo teach you how to choose and buy satisfactory laser particle size analyzer Wuxi Jabo Electrical Technology Co., Ltd. 13301515116

  • Total: 4 Pages: 1/1 Home Pre Next Last